ERBE Erbotom ICC 300
Call For PRICING
The ERBE ICC 300 is a high-frequency surgical unit for cutting and coagulation. It’s the price-conscious solution for medium and major surgical procedures. After all, a smooth routine in the operating room depends on maximum safety, a high degree of comfort in use, and perfect functionality – exactly the features of the ICC 300 . And it also meets the special demands of Minimally Invasive Surgery.
- CUT CONTROL for automatically perfect cuts.Reproducible cut quality with minimum necrosis
- HlGH CUT with specialized arc regulation for underwater cuts or in fatty structures
- SOFT coagulation for precisely controlled coagulation
- No carbonization (SOFT COAG)
- Far less adhesion and electrode soiling
- Bipolar coagulation for even greater safety
- PPS for intelligent support of initial incisions and cutting
- AUTO START for greater facility of bipolar coagulation
- SPRAY coagulation for better surface effects
- ARGONPLASIVIA coagulation via integrated plug-in connection
Dimensions
- Dimesnsions (HxWxD) cm, (In) (Display) 41 x 15.2 x 36.8 (16.1 x 5.9 x 14.5)
- Weights, kg (lb) (Display) 10 (22)
Electrical
- Monopolar (Systems) Cut(blend), coagulate
- Max. energy output ( at rated ohms) (SYSTEMS) More than 250 Watt 300
- Max voltage, vp-p (Systems) 1200
- Max. energy output ( at rated ohms) (SYSTEMS) Up to 150 Watt 120
- Max voltage, vp-p (Systems) 380 soft, 5,600 spray
- Bipolar (SYSTEMS) Coagulate
- Max. energy output ( at rated ohms) (SYSTEMS) Up to 150 Watt 120
- Max voltage, vp-p (Systems) 380
Power Connection
- Rated power voltage 240 V / 230 V / 115 V / 110 V / 100 V ± 10 %
- Rated power frequency 50 / 60 Hz
- Power current 4.0 A at 230 - 240 V / 8.0 A at 100 - 115 V
- Power consumption in Standby mode 25 watts
- Power consumption at max. HF power 620 watts 920 VA
- Current consumption in Standby mode 150 mA at 230 - 240 V / 300 mA at 100 - 115 V
- Potential equalization terminal yes
- Power fuses 2 slow burn, 4 A at 230 - 240 V / 8 A at 100 - 115 V
Environmental Conditions for Storage
- Temperature -40°C to + 70°C
- Air humidity, relative 30% to 95%
Environmental Conditions for Operating
- Temperature +10°C to + 40°C
- Air humidity, relative 30% to 75%, noncondensing
Cutting, monopolar with automatic voltage control (Auto Cut)
- HF voltage waveform unmodulated sinusoidal alternating voltage
- Crest factor C, at RL = 500 ohms C = 1.4 for all setttings
- Rated frequency 330 kHz
- Maximum HF voltage at load resistance RL = ∞ 650 VP
- Dynamic internal impedance in rated load range 0 ohm
- Constancy of the HF voltage at RL> 350 ohms automatically controlled
- Cutting quality 4 coagulation effects selectable by key
- Constancy of the 4 coagulation effects automatically controlled
- HF rated power 300 watts at RL = 500 ohms
- HF power limitation 1 to 300 watts in 1 watt steps
- Setting of the HF power limitation via up/down keys
- Display of the HF power limitation 7-segment display, 3 decimal places
- Precision of the HF power limitation +/- 1 digit or +/- 15%
- Activation of Cutting mode by key or pedal
- HF connecting sockets 2, electronically locked from one another
Cutting, monopoly with automatic arc control (High Cut)
- HF voltage waveform unmodulated sinusoidal alternating voltage
- Crest factor C, at RL = 500 ohms C = 1.4 for all setttings
- Rated frequency of the HF voltage 330 kHz
- Maximum HF voltage at load resistance RL = ∞ 570 VP
- Constancy of the intensity of the electric arc automatically controlled
- Cutting quality 4 coagulation effects selectable by key
- Constancy of the 4 coagulation effects automatically controlled
- HF rated power 300 watts at RL = 500 ohms
- HF power limitation 1 to 300 watts in 1 watt steps Setting of the
- HF power limitation via up/down keys Display of the
- HF power limitation 7-segment display, 3 decimal places
- Precision of the HF power limitation +/- 1 digit or +/- 15%
- PPS (Power Peak System) yes
- Activation of Cutting mode by key or pedal
- HF connecting sockets 2, electronically locked from one another
Soft Coagulation (Soft Coag)
- HF voltage waveform unmodulated sinusoidal alternating voltage
- Crest factor C, at RL = 500 ohms C = 1.4 for all setttings
- Rated frequency of the HF voltage 330 kHz
- Peak value of the HF voltage max. 1900 VP
- Constancy of the HF voltage automatically controlled
- HF rated power 120 watts at 125 ohms
- HF power limitation (PHFmax.) from 1 watt to 120 watts in 1 watt steps
- Setting of the HF power limitation via up/down keys
- Display of the HF power limitation 7-segment display, 3 decimal places
- Precision of the HF power limitation +/- 1 digit or +/- 15%
- Activation of Cutting mode by key or pedal
- HF connecting sockets 2, electronically locked from one another