Dimensions

• Height: 6.7 in (17 cm)
• Width: 16.7 in (42.4 cm)
• Depth: 17.5 in (44.4 cm)
• Weight: 22 lbs (10.9 kg)

Power

• Nominal Line Voltage: 100 VAC | 120 VAC | 220 VAC | 230 VAC | 240 VAC
• Line Frequency: 50/60 Hz
• Power Consumption: 100 W | 0.4 A
• Chassis Leakage: < 300 μA

Operating Environmental

• Operating Temperature: 50°F to 104°F (10°C to 40°C)
• Operating Humidity: 10% to 95%, non-condensing
• Operating Pressure: 700-1060 mbar (525-795 mmHg)

Storage Environmental

• Storage Temperature: 14°F to 131°F (-10°C to 55°C)
• Storage Humidity: 45% to 65%, non-condensing
• Storage Pressure: 700-1060 mbar (575-795 mmHg)

FECG Mode

• Technique: Peak detecting, beat-to-beat cardiotachometer
• Heart Rate Counting Range: 30–240 bpm
• Heart Rate Resolution: ± 1 bpm
• Artifact Elimination:Selectable, ± 25 bpm artifact rejection
• Countable Input Signal Range: 15 µV to 2 mV peak-to-peak
• Offset Voltage Tolerance (Differential): ± 300 mVdc maximum
• Maximum Common Mode Voltage: 20 V peak-to-peak
• Preamplifier Bandwidth: 1–90 Hz
• Common Mode Rejection:
• Balanced:> 120 dB at mains frequency, with patient cable
• Unbalanced 5kΩ RA or LA: > 110 dB at mains frequency
• Input Equivalent Noise: < 10 µV peak-to-peak
• Input Impedance:
• Differential: > 10 MΩ
• Common Mode: > 20 MΩ
• Mains Frequency Rejection: > 40 dB
• Leakage Current: < 60 µA at 254 VAC, electrically isolated
• Isolation, Mains-to-Patient: > 4 kVAC

Ultrasound Mode

• Technique: Pulsed Doppler with autocorrelation processing
• Transducer Type: 9-crystal
• Pulse Repetition Frequency:
• Single Ultrasound Mode: 4 kHz
• Dual Ultrasound Mode: 2 kHz
• Pulse Duration: 92 µs
• Transmitter Frequency: 1.151 MHz
• Spatial-Peak Temporal Average Intensity: Ispta < 10 mW/cm2
• Spatial-Average Temporal Average Intensity: sata< 5 mW/cm2
• Focal 20 dB Beam Area: 16.6 cm2 , at a range = 7 cm
• Peak Instantaneous Intensity: 1.8 mW/cm2
• Peak-Negative Acoustic Pressure: p < 10.0 kPa
• Heart Rate Counting Range: 50–210 bpm
• Leakage Current: < 10 µA at 120–240 VAC, isolated by transducer

• Comprehensive perinatal monitoring needed during labor and delivery.
• Monitors the following parameters: DINAMAP SuperSTAT NIBP, TEMP, Masimo® SET or Nellcor® SpO2, 3-Lead Maternal ECG.
• Smart BP delays blood pressure measurement during contractions, reducing distractions and providing more meaningful diagnostic data.
• ChartLight with backlit keys and dimmable display help make the monitor unobtrusive, even in low-light environments.
• Watertight transducers use 9-crystal ultrasound technology for a wider focal region and more uniform coverage.
• Intuitive hot keys allow most tasks to be completed easily at the touch of a button.
• Optional — CPN compatibility to streamline the capture and archival of patient data.
• Optional — Telemetry interface for continuous monitoring without changing transducers during ambulation or laboring in water.